
Five sensors, day and night.
Wide-angle, zoom, thermal camera, laser rangefinder and NIR light in one gimbal. The tool for security, search and rescue, and inspections.
Thermal and visible side by side, to find the person or hot spot and see what it is.
A 40 MP zoom camera up to 809 mm equivalent, for inspections from a safe distance.
The laser gives target distance and coordinates to send straight to the crew.
Night mode and NIR light for images without visible light.
Source: DJI’s official specifications, as published by the manufacturer. Values were measured in controlled conditions. Official page ↗
The H30 has a wide camera, a zoom camera, a laser rangefinder and an NIR light. The H30T has all of these plus a 1280×1024 thermal camera.
The Matrice 400, Matrice 350 RTK and Matrice 300 RTK (the 300 RTK needs the DJI RC Plus controller), on the latest firmware.
IP54 to IEC 60529, measured in the lab. Protection decreases gradually with wear.
Yes, it is the sensor's native resolution, not an algorithmic enhancement.
High gain for more precise measurement from −20 to 150 °C, low gain for a wider range from 0 to 600 °C, and a high-res mode that brings out small temperature differences without measurement.
High gain ±2 °C or ±2%, low gain ±5 °C or ±3%, whichever is greater (lab measurement at 25 °C from 13 m). With the optional density filter it measures up to 1,600 °C, at lower accuracy.
At any point in the image with a tap, at the image centre for higher precision, or across an area, showing the highest and lowest temperatures and where they are.
Based on DJI’s official FAQ, in our own words. Official page ↗
Fill in the form and an ADESCO advisor will contact you within one business day.