DJI Zenmuse S1 — ADESCO Drones

Q: Which drones does it fit?

The Matrice 400, Matrice 350 RTK and Matrice 300 RTK (the last two only with DJI RC Plus), on the latest firmware.

Q: How well is it protected?

IP54 to IEC 60529. Protection decreases gradually with wear.

Q: How bright is it?

40 lux at 100 m on the Matrice 400 and 35 lux on the Matrice 350/300 RTK.

Q: How large an area does it light?

The low beam (15°) lights about 544 m² at 100 m and the high beam (4°) about 38 m².

Q: What is the difference between the three modes?

Low beam spreads light evenly for the ground and for imaging. High beam is narrow and penetrating, for long-range observation at low power. Both together give a wide beam with a strong centre.

Q: What jobs is it for?

Public safety, search and rescue, emergency repairs, traffic enforcement and equipment inspection.

Modes

From search to warning.

01

15° up to 150 m

Covers what the camera sees at 5× zoom and above, for search and inspection.

02

Narrow beam for distance

Lights towers and targets further away.

03

Draws attention

Fast strobing for signalling in rescue and public safety.

Technical specifications

Specifications

Spotlight

ModesLow, high, both, strobe

Low beam15° · 150 m

General

Weight760 g

Protection / temperatureIP54 · -20 to 40 °C

Surface temperatureup to 50 °C, no burn risk

Compatible withMatrice 400

General8

Product Name: Zenmuse S1
Weight: 760±10 g
Dimensions: 125×152×171 mm (L×W×H)
Rated Power: 120 W (Matrice 400)
68 W (Matrice 300 RTK/Matrice 350 RTK)
Supported Aircraft: Matrice 400
Matrice 350 RTK
Matrice 300 RTK (requires DJI RC Plus)
Eye Safety Class: IEC 62471: Risk Group 1
Shell Temperature: <50° C (122° F, plastic shell)
Ingress Protection Rating: IP54

Environment2

Operating Temperature: -20° to 40° C (-4° to 104° F)
Storage Temperature: -20° to 60° C (-4° to 140° F)

Gimbal6

Stabilization System: 3-axis (tilt, roll, pan)
Angular Vibration Range: Hover: ±0.01°
Flight: ±0.02°
Mounting: Detachable DJI SKYPORT
Mechanical Range: Tilt: -129° to +73°
Roll: ±55.8°
Pan: ±327°
Controllable Range: Tilt: -120° to +60°
Pan: ±320°
Operation Mode: Follow / Free / Re-center

Illuminance7

Maximum Central Illuminance: 40 lux @ 100 m (Matrice 400, Both On mode)
35 lux @ 100 m (Matrice 300 RTK/Matrice 350 RTK, Both On mode)
Low Beam Central Illuminance: 20 lux @ 100 m (Matrice 400, Low Beam mode)
13 lux @ 100 m (Matrice 300 RTK/Matrice 350 RTK, Low Beam mode)
High Beam Central Illuminance: 30 lux @100 m (High Beam mode)
Effective Illumination Angle: 15±1° (10% relative illuminance, Low Beam mode and Both On mode)
4±0.5° (10% relative illuminance, High Beam mode)
Typical Color Temperature: 6500K typical value (Low Beam mode)
7500K typical value (High Beam mode)
Dimming Mode: Analog dimming
Effective Illumination Distance: 500 m (Both On mode)

Basic Features5

Lighting Control: Turning light on/off, brightness adjustment
Strobe Mode: 5 Hz strobe
Lighting Mode: Low Beam mode, High Beam mode, Both On mode
Remote Controller Buttons: Can be set for turning the light on/off, brightness adjustment, or lighting mode changes
Gimbal Synchronization: Supports synchronized control with other gimbal-equipped payloads

Special Features4

Eye Protection: Automatically limits brightness to 40% when not in flight
Payload Protection: LED, LEP temperature protection, overcurrent protection, and power protection to prevent damage.
Synchronized Control: When two Zenmuse S1 are mounted on Matrice 400, both spotlights can be controlled at the same time.
Intelligent Beam Alignment: When used with the Zenmuse H30 Series on Matrice 400, Zenmuse S1 employs gimbal synchronization to automatically align the spotlight beam with the camera view.

Source: DJI’s official specifications, as published by the manufacturer. Values were measured in controlled conditions. Official page ↗

Before you buy

Frequently asked questions

Which drones does it fit?

The Matrice 400, Matrice 350 RTK and Matrice 300 RTK (the last two only with DJI RC Plus), on the latest firmware.

How well is it protected?

IP54 to IEC 60529. Protection decreases gradually with wear.

How bright is it?

40 lux at 100 m on the Matrice 400 and 35 lux on the Matrice 350/300 RTK.

How large an area does it light?

The low beam (15°) lights about 544 m² at 100 m and the high beam (4°) about 38 m².

What is the difference between the three modes?

Low beam spreads light evenly for the ground and for imaging. High beam is narrow and penetrating, for long-range observation at low power. Both together give a wide beam with a strong centre.

What jobs is it for?

Public safety, search and rescue, emergency repairs, traffic enforcement and equipment inspection.

Based on DJI’s official FAQ, in our own words. Official page ↗

The complete system